EN 62115 core Test Items are as follows
Power Input TestMeasures the input power of the toy under normal operating conditions; deviation must not exceed20 %.
Temperature Rise TestMeasures the temperature of accessible surfaces of the toy under both normal and abnormal operating conditions.
Electric Strength Test at Working VoltageA specified voltage (e.g.,500 V AC), leakage current must not exceed0.5 mA.
Moisture Resistance TestThe toy is placed in a93 %±3 % RH humidity environment for 4 hours, followed by insulation resistance and electric strength testing. Insulation resistance must be no less than 10 Mohms.
Mechanical Strength TestAfter the toy enclosure withstands impact testing (spring impact hammer 0.7J) and drop testing, no live parts may be exposed.
Construction Safety TestBattery compartment design must prevent incorrect battery installation (polarity marking), live parts must not be accessible, and tools must be required to open the battery compartment (if applicable).
Laser and LED Radiationtoy in Lasers used must not exceed IEC 60825-1 in 1 Class laser Limit(e.g., continuous visible laser output must not exceed0.39 mW).LEDradiation must not exceed IEC 62471inexempt group Limit.
| Accessible Surface Type | Normal Operating Temperature Rise Limit | Abnormal Operating Temperature Rise Limit |
|---|
| --------------- | ------------------ | ------------------ |
| Metal Parts | 40 K | 50 K |
| Non-metal/Coated Metal | 50 K | 60 K |
| Handles Continuously Gripped by Children | 35 K | 45 K |
I. Electrical Safety Testing
II. Radiation and Toxicity Testing
III. Battery Safety Testing
IV. Remote-Controlled Toy Additional Testing